CelluBOR Surface Hardener - 13
With the application of CelluBOR-13 Surface Hardener (CSH-13), the hardness of CelluBOR insulation material in the applied surface is increased and extra precautions are taken against possible physical damage. With this application, the insulation material and the insulation surfaces of the bottom surfaces can be lengthened considerably and a different appearance for the aesthetic purpose is also provided.
With CSH-13 the cumulative acoustic noise loss that can occur in the whole CelluBOR application system is negligible.
Surfaces with insulation are not protected against physical damage to open areas, which may be caused by other possibilities such as people, machines and even birds. With the application of CelluBOR-13 Surface Hardener (CSH-13), the hardness of the surface is increased to protect against possible physical damage. With this application, the insulation material and the insulation surfaces of the bottom surfaces also prolong the lifespan and gain a different appearance for aesthetic purposes.
Coating with CSH-13; protect the insulation surface from all kinds of industrial pollution such as dust, dirt, oil and smoke. After CSH-13 application, a more solid insulation is obtained; the contamination that may occur can be significantly reduced. As a result, CSH-13 applied surface can easily be cleaned with a soft broom, air pressure or wipe.
With the application of CSH-13, the surface acquires high reflectivity and the installation looks brighter. By projecting and reflecting the light, it will improve working conditions and work safety conditions without requiring any additional electric lighting.
CSH-13, which is coated and hardened as a protective material for fibrous insulation materials, has little effect on the acoustic performance of the underlying CelluBOR insulation material. Since the results of the tests reveal that the acoustic properties of the CelluBOR insulation material are not affected, the final acoustic values CelluBOR acoustical performance values are regarded as the same.
CelluBOR Surface Hardener - 13; Class 1 and Class A flame spreading grades according to ASTM E-84 standards.
CelluBOR, which has a fibrous and hollow material structure, will require a considerably high paint consumption without using CSH-13 and will not reflect the desired color fully. Thanks to CSH-13, it is possible to form the desired color on the surface with less paint consumption. The standard CSH-13 color is ice white. Special orders can be produced in the desired color. A water-based paint can also be applied afterwards.